Broad Jumps: Muscles Worked, Technique, and How to Program Them
Broad jumps train the quads, glutes, hamstrings, and calves through explosive horizontal power. Learn exact technique cues, which muscles are worked, and how to program them.

Photo by RepBro.
Most lifters can tell you what a squat trains. Ask them what a broad jump trains and you get vague answers — "legs, I guess" or "it's just conditioning." That's a miss. The broad jump is one of the most underused tools in lower-body power development, and understanding exactly what it works — and why — will change how you program it.
What Muscles Do Broad Jumps Work?
The short answer: broad jumps primarily train the quadriceps, gluteus maximus, hamstrings, and gastrocnemius/soleus complex. The hip flexors contribute to the flight phase, and the core — specifically the rectus abdominis and transverse abdominis — braces the trunk throughout takeoff and landing. Every major lower-body muscle group is loaded under high velocity, which is exactly the point.
Here's the breakdown by phase:
Takeoff (Concentric Drive)
- Quadriceps — knee extension is the dominant force-producing action; the quads are the primary driver of forward projection
- Gluteus maximus — hip extension at takeoff generates the horizontal vector; under-trained glutes will kill your distance
- Hamstrings — act as hip extensors and stabilize the knee during the powerful push-off
- Gastrocnemius and soleus — plantarflexion at the ankle contributes the final impulse; often overlooked but critical for total ground contact force
Flight Phase
- Hip flexors (iliopsoas, rectus femoris) — drive the knees forward to maintain horizontal momentum and set up landing position
- Core — holds lumbar position so power transfers cleanly from hips to upper body swing
Landing (Eccentric Absorption)
- Quadriceps — absorb landing forces that can reach 3-4x bodyweight; eccentric quad strength directly limits how safely you can decelerate
- Glutes and hamstrings — co-contract to stabilize the hip and protect the knee on impact
- Tibialis anterior — controls the foot during dorsiflexion at initial contact
The broad jump is a bilateral horizontal plyometric, which classifies it as a slow plyometric (ground contact time typically exceeds 250 ms). That places it in the same category as countermovement jumps — demanding, but trainable even for athletes newer to plyometric work.
Why Broad Jump Training Benefits Go Beyond the Gym
Horizontal power is underrepresented in most gym programs. The squat, leg press, and Romanian deadlift all train force in the vertical plane. Sprinting, cutting, and acceleration are overwhelmingly horizontal. The broad jump bridges that gap.
Research published in the Journal of Strength and Conditioning Research found that broad jump performance in elite collegiate football athletes correlated with sprinting kinetics, reinforcing the movement's role as both a training tool and a diagnostic of horizontal power output (Boone et al., 2021). When horizontal force production goes up, sprint acceleration typically follows.
Beyond sport, the broad jump builds:
- Reactive strength — the stretch-shortening cycle (SSC) is trained every rep; elastic energy storage and reuse improves with consistent exposure
- Landing mechanics — absorbing force bilaterally under load teaches the nervous system to decelerate safely, which reduces ACL and patellar tendon injury risk
- Neuromuscular coordination — producing maximal force in minimal time requires motor unit synchrony that isolated machine work simply doesn't develop
Broad Jump Technique: Step-by-Step
Bad technique limits distance and increases injury risk. Here's how to do it right.
Setup Stand with feet hip-width apart, toes pointing forward. You need about 3-4 meters of clear floor space in front of you.
Countermovement Hinge at the hips, push your knees out slightly, and swing your arms back simultaneously. Lower to roughly a quarter-squat depth — not a full squat. This loads the SSC. The deeper you go, the slower the movement becomes and the less elastic energy you store.
Takeoff Drive your arms forward explosively while extending your hips, knees, and ankles simultaneously. Think "push the floor behind you" rather than "jump up." Your body angle at takeoff should be roughly 45 degrees to the ground for maximum horizontal distance. Fully extend through the ankles — don't leave the calf contribution on the table.
Flight Pull your knees up toward your chest in the air. This shifts your center of mass forward and increases distance. Keep your core tight.
Landing Land with both feet simultaneously, knees bent, hips back. Absorb the force through your entire foot, not just your toes. Stick the landing — don't let your knees cave inward. A sloppy landing is wasted training stimulus and a setup for injury.
Common faults to fix:
- Squatting too deep on the countermovement (kills elastic energy)
- Leaning too far back at takeoff (produces upward force instead of horizontal)
- Collapsing at the knees on landing (quad weakness or poor motor control — address both)
- Jumping with arms pinned to the sides (arm swing contributes meaningfully to distance)
How to Program Broad Jumps
This is where most content falls short. Sets and reps exist everywhere; programming context does not.
Where Broad Jumps Fit in a Session
Broad jumps are neural, not metabolic. Program them before your main strength work, after a thorough warm-up. Fatigued jumps have reduced power output and worse landing mechanics. A common mistake is tacking plyometrics onto the end of a leg day — you'll get a fraction of the adaptation.
Volume Guidelines
The NSCA's plyometric training guidelines suggest beginners start at 80-100 ground contacts per week total across all plyometric exercises, with intermediate lifters working in the 100-150 range. For broad jumps specifically:
| Experience Level | Sets | Reps per Set | Weekly Frequency |
|---|---|---|---|
| Beginner | 2-3 | 3-5 | 1-2x |
| Intermediate | 3-4 | 4-6 | 2x |
| Advanced | 4-5 | 5-8 | 2-3x |
Rest fully between sets — 2-3 minutes minimum. Power output drops sharply with incomplete recovery. If you're treating broad jumps like a conditioning circuit, you're doing cardio, not power training.
How to Progress
Broad jump progression isn't just "jump farther." Here are four ways to systematically overload:
- Distance tracking — measure and record each set. Aim for a 2-5% improvement over 4-6 weeks.
- Bounding sequences — transition from a single broad jump to 3-5 consecutive bounds, increasing reactive demand
- Loaded countermovement — hold a light medicine ball (2-4 kg) during the countermovement to increase eccentric load
- Unilateral progression — advance to single-leg broad jumps once bilateral mechanics are solid; this exposes asymmetries and increases difficulty dramatically
Where Broad Jumps Fit in a Full Program
Pair them with posterior-chain strength work for a potent combination. A practical pairing:
- Day 1 (Lower Power): Broad jumps 3x5 → Back squat → Romanian deadlift
- Day 2 (Lower Strength): Trap bar deadlift → Bulgarian split squat → Leg curl (no jumps)
This keeps the neural demand of plyometrics on a day when the nervous system is fresh, and separates them from pure strength sessions to avoid cumulative fatigue.
Who Should (and Shouldn't) Start With Broad Jumps
Broad jumps are appropriate for most healthy adults. However, if you can't squat your bodyweight to parallel with good form, address that first — the eccentric landing demands require baseline quad and glute strength. Anyone returning from a lower-body injury should clear the movement with a physio before adding plyometric load.
One Thing to Try in Your Next Session
Before your next lower-body workout, add two sets of 4 broad jumps after your warm-up. Measure your distance on the first rep of each set. Write it down. Come back in three weeks and compare. That number will tell you more about your horizontal power development than any machine metric — and improving it will show up in every athletic quality that matters.
If you want a program that already knows where to slot your plyometrics, your strength work, and your recovery days — and can answer questions mid-session about swapping exercises or adjusting volume — RepBro builds that structure for you in about 90 seconds.
Frequently asked questions
- What muscles do broad jumps work?
- Broad jumps primarily work the quadriceps, gluteus maximus, hamstrings, and calf muscles (gastrocnemius and soleus). The hip flexors contribute during the flight phase, and the core stabilizes throughout. Every major lower-body muscle group is loaded under high velocity at takeoff and during the eccentric landing phase.
- Are broad jumps better than vertical jumps for building power?
- Neither is strictly better — they train different force vectors. Vertical jumps develop upward power, which transfers to jumping sports. Broad jumps develop horizontal power, which transfers more directly to sprinting and acceleration. Most programs benefit from both. If your sport involves running, broad jumps deserve priority.
- How many broad jumps should I do per workout?
- Beginners should start with 2-3 sets of 3-5 reps, 1-2 times per week. Intermediate lifters can progress to 3-4 sets of 4-6 reps twice per week. Always rest 2-3 minutes between sets and program broad jumps before strength work, not after, to preserve power output.
- Can you do broad jumps without any equipment?
- Yes. Broad jumps require only a flat surface and about 3-4 meters of clear space. They are one of the most effective no-equipment lower-body power exercises available, making them ideal for home training, travel, or warm-up routines.
- How do I know if my broad jump is improving?
- Measure your distance consistently — use a tape measure or floor tiles as a reference. Record the best jump of each session. A 2-5% improvement over a 4-6 week training block is a realistic target. Stalled distance usually means insufficient rest between sets, poor technique, or inadequate strength base.
- Do broad jumps build muscle or just power?
- Broad jumps build power and neuromuscular efficiency more than muscle mass. They train the stretch-shortening cycle and improve motor unit synchrony, which increases force production speed. For hypertrophy, pair them with loaded squat and hip hinge variations. The combination of strength work plus plyometrics produces better athletic results than either alone.